The Braid Assistant

A machine that helps with braiding or weaving

After the utter disappointment that was my last machine, a good portion of this assignment was dedicated to just finding out what went wrong. After many hours of frustration and troubleshooting I learned that apparently my laptop will no longer upload Arduino codes directly. As such, this entire project had to be tethered to my desktop.

 

Originally my goal was to have a machine that could braid three strings with minimal human intervention. However, after testing and failing I came to realize that the machine worked best with a human operator moving the middle string (the control string). With the servo handling a simple criss-cross motion, different patterns with the middle string can create a number of different braids.

Instructions for operation:

1- Cut 3 even lengths of string

2-Tie one end of a strand on to each of the hooks in the box.

3-Tie the other ends onto a rod- a pencil is an easy solution

4-Between those two knots, attach the third string. It should hang loose between those two

5-Activate the machine by plugging it into the computer (do NOT under any circumstances try to upload a sketch to the Arduino after this point.)

6-Weave the control string while moving the rod with the other

 

Finished product:

https://www.youtube.com/watch?v=XYMtzDx2WRw&t=1s

 

test videos:

https://www.youtube.com/watch?v=l439Bc00J2I

https://www.youtube.com/watch?v=O2pQdBTmXQw

 

Images:

20180313_211828 -Early hook and servo placement20180313_215122  -At one point a send servo was attached to the rod- this was scrapped

20180314_083417 -scrapped 2 servo design20180314_094719  -First successful braid20180314_094724 -Closeup of the connection hooks20180314_101840   -Finished machine20180313_220617 -string test

Hello world!

Welcome to OCAD University Blogs. This is your first post. Edit or delete it, then start blogging! There are tons of great themes available for you to choose from. Please explore all of the options available to you by exploring the Admin Toolbar (when logged in) at the top of the page, which will take you to the powerful blog administration interface (Dashboard), which only you have access to.

Have fun blogging!