Visual Abyss

Hi everyone thank you for the discussion on clarifying my piece yesterday, i felt relieved to be letting go of the domes to explore a new form that would capture the essence of what I wish to achieve when dealing with the senses.


Through observation in the way individuals interact I feel people rely on their visual senses above the rest when interacting within a space or access the world around them. Recently, I have learned to experience the world using my whole body and not just rely on my sight to make decisions and through this next piece I hope to alter the wearer’s relation to their surroundings. In order to achieve this I will create a device to be worn on the head that will convert visuals (input) into sound (output). The wearer is challenged to let go in their sense of sight and just ‘listen’ to their surroundings that will be affected by moving bodies within the space.

It will also be a possibility for the piece to be a portable device that the user can put on anytime they chose to visually ‘leave’ a space, into an audio escape of ambient sound.


Electronic component

-arduino mini pro    -webcam (infrared red sensor)  -speakers  -Graphic Equalizer Display Filter chip (MSGEQ7)  -wire   -PCB board (possible hand made)

Fabrication component

-possibly work with plastics shop to make a ring form to cover eyes/ears OR create face shield structure

– foam to insulate the interior to make it comfortable to wear


Work Plan:

Week one (March 19-25) – Work on electronics component to get speakers to work with the sensor (webcam)

Week two (March 26-April 1) -Think about the fabrication of the piece once electronic component is problem solved

Week three (April 2- April 8)- Start fabrication of the piece and problem solve some more!

Week four (April 9- April 15) – Put everything together and problem solve some more!


Related Works:



final project proposal

concept: after a heart-break experience in the dentist last week (as horrible as every time before,dentist is my nightmare actually, from childhood), I’m totally regretful of my carelessness of my teeth protection before. Now I want to try my best to take care of them.

The 1st important thing is brushing teeth, although the professionals recommended the best timing is 2mins, but a lot of people fail to do that. Take my own experience for example, when I was a kid, it’s impossible to stand in front of sink for 2 whole minutess for this boring thing. Then now I got a idea, to develope the experience for brushing teeth.

It will be a interactive installment (either a game or interaction of art work), which is  setted in the bath room, the sensor will be connected with the tooth brush. During the process of brushing teeth, the user can obtain interactive experience showing in front of him (so far I’m thinking to use the pocket projector to project a little screen in front of the user. )

The purpose of this design is to make the user get more fun within this 2 exact minutes, make them feel time is shorter. Ideally it can also provide functionality of guiding the user of the right way of (position and method) of brushing the teeth.


Arduino, sensor ( tilt/accelerometer/vibration), computer, pocket projector, tooth brush, battery, XBee, wires

Workplan – dates & tasks:

week 1: play with sensor

week 2: coding the interaction part

week 3: bug shooting of coding, and make prototyple

week 4: make it wireless, and build physical form

week 5: finalize

Related works:

Smart Tooth brush & Smart Mirrow System

interaction project with vibration sensor

interactive bumping bubble

interactive video with fan



Social Reactive Cap


A hat that encourages or discourages its wearer’s social interaction by uncovering or covering his/her face when a conversation or other face-to-face interaction occurs. Depending on many considerations, there will be either two hats or two modes in one hat. The encouraging hat/mode covers the face when the sensor doesn’t feel anything, and opens to welcome interaction when either someone approaches or the wearer initiates a interaction. The discourage one does the opposite, being open and friendly in standby mode, but closing up to cover the wearer’s face to discourage the interaction from happening. Metaphors for these two scenarios could be a shy or seemingly cold person is eager to interact with people and a seemingly friendly person actually prefers to stay alone.

My last project Attention Hat is inconvenient and potentially uncomfortable to wear on a regular basis. This time I want to design something that can be worn everyday if desired and still deals with social interaction in the physical space.

Parts & materials list:


Servo Motor(s)

Sensors (sound or proximity or both or more to be decided)



Fabric / Textile / Hat-modifying materials


Workplan – dates & tasks:

week 1: get parts & materials, explore different ways of covering/uncovering the face, research and design look & feel

week 2: narrow down design candidates, choose a sensor based on selected design(s), make servo and chosen sensor work together in the intended way (aka get the code working)

week 3: make working prototypes, choose one design and get parts & materials for final prototype(s)

week 4: make final prototype(s)

week 5: finish making final prototype(s)

Resources & related works:



Short description for Technosapien show:

In the first mode, when someone approaches the wearer, a hidden brim on the cap lowers to cover the wearer’s eyes to prevent social interaction, as if the wearer doesn’t want to interact with people. In the second mode, the extra brim is lowered by default, but rises out of the way of face-to-face interaction when someone gets close, as if the wearer welcomes whoever approaches. The two modes have their corresponding personalities in life: some seemingly friendly people actually prefer to be alone; some seemingly cold people actually are eager for social interactions.